Loading ...
Loading ...
Loading ...
Pedestal Base
• Remove the height adjustment knob from the pedestal outer tube.
• Slide the base cover over the pedestal outer tube and replace the height adjustment knob.
• Place the outer tube onto the base and the base weight under the base add washer then
tighten with the screw provided.
Mounting Fan onto Pedestal Base
• If necessary, slightly loosen the head securing screw by turning it anticlockwise.
• Slide the switch box down over the inner tube and tighten the securing screw.
• Make sure the securing screw is done up tightly.
Blade and grill
• Unscrew the guard mounting nut from the front of the motor housing by rotating it
anticlockwise.
• Position the rear grill against the front of the motor housing with the handle at the top,
ensure that the locating pegs on the motor housing are engaged correctly in the holes of the
rear grill.
• Tighten the guard mounting nut clockwise; do not to over tighten.
• Push the fan blade onto the motor shaft, locating the slot at the back of the blade on the
drive pin that passes through the motor shaft.
• Tighten the blade cap by turning it anticlockwise.
• Position the front grill against the rear grill so that the holes in the rims that accept the small
nut and bolt are in line.
• Insert the bolt through the holes and screw on the nut. Do not fully tighten at the stage.
• Push the grill retaining clips into position ensuring that they engage correctly on the rim of
the grill.
• Fully tighten the small nut and bolt that passes through the rim of the grill.
Assembly
Loading ...
Loading ...
Loading ...