Loading ...
Loading ...
Loading ...
36
[HDMI Audio]
Selects the HDMI audio setting when you
connect this Home Theatre System and the
TV with a HDMI cable.
• [On] – Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
• [Off] – Disables audio output from the
TV. The sound is only output through the
speaker system.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – Enjoy quiet viewing at night.
• [Off] – Enjoy surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded discs.•
Audio setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Audio Setup], then
press
.
3 Select an option, then press OK.
4 Select a setting, then press OK.
To return to the previous menu, •
press
BACK.
To exit the menu, press •
SETUP.
Note
See the explanations of the above options in •
the following pages.
[Ambisound Setup]
Optimises Ambisound based on the Home
Theatre System’s setup in the room (see
‘Getting Started’ > ‘Start Ambisound setup’).
Option Description
[Setup
Guide]
Guides you through the
complete setup requirements.
[Room
Acoustics]
Selects the type of walls that
surround the room.
[Room
Placement]
Selects the placement in the
room.
[Height] Selects the height at which it is
placed.
[Listening
Position]
Selects the distance between
the listening position and the
Home Theatre System.
HDMI Audio
Ambisound Setup
Night Mode
Audio Setup
EN
Loading ...
Loading ...
Loading ...