
Before using your new product, please read these instructions to prevent any damage.
1 Connect the small end of the charging cable to the micro USB port on the back of your speaker.
2 Connect the other end to a USB port on your computer or wall adapter (not included). The LED indicator is red while charging, then turns off when the speaker is fully charged.
Note: The speaker beeps continually when the battery is low. About five minutes later, the speaker turns off automatically.

1 Press and hold
(power) to turn on your speaker. The LED indicator blinks blue quickly and your speaker automatically enters pairing mode.
2 Make sure that your Bluetooth device is within 33 ft. (10 m) of your speaker.
3 Turn on your Bluetooth device, turn on Bluetooth, then enter pairing mode. For more information, see the documentation that came with your Bluetooth device.
4 On your Bluetooth device, select NS-SPBTWAVE2. Your speaker pairs with your Bluetooth device and the LED indicator lights solid blue.
5 To disconnect, un-pair your Bluetooth device from your speaker. OR
Press and hold
(call) for three seconds on your speaker. Your Bluetooth devices loses connection automatically.
Audio cable
The LED indicator blinks blue slowly while connected to an audio cable.
When your speaker is not paired to a device, the LED blinks blue.
|
Your speaker loses the Bluetooth connection if you... |
-To reconnect... |
|
Turn off your speaker. |
Turn on your speaker. Your speaker searches for the last connected Bluetooth device and reconnects. |
|
Move the Bluetooth device out of range. |
Make sure that your Bluetooth device is within 33 feet of your speaker. |
|
Turn off your Bluetooth device. |
Turn on your Bluetooth device, then make sure that Bluetooth is on. |
|
Turn off Bluetooth on your Bluetooth device. |
Turn on Bluetooth on your Bluetooth device. |
|
Connect your Bluetooth device to another Bluetooth device. |
Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select NS-SPBTWAVE2 on your Bluetooth device. |
Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal has to pass through walls or other obstructions.
Listening to audio
1 Connect to your speaker with Bluetooth or an audio cable.
2 Play audio on your connected device.
3 Press + or - to adjust your speaker's volume.
Note: Make sure that your connected device's volume is set to at least 50%.
4 Use the controls on your connected device to control playback.
Using your speaker
The following functions are available when paired to a phone with Bluetooth:
(call).
(call).
(call).
(call).
(call) twice.LED indicator
|
LED |
FUNCTION |
|
Blinks blue quickly |
Bluetooth pairing mode |
|
Lights solid blue |
Paired to a Bluetooth device |
|
Blinks blue slowly |
Connected to an AUX device |
|
Lights red |
Speaker is charging (charging complete when LED turns off) |
|
PROBLEM |
SOLUTION |
|
No power |
|
|
No sound or low volume |
|
|
Cannot establish Bluetooth connection |
|
|
My Bluetooth device keepsunpairing |
|
|
"NS-SPBTWAVE2" does not appear on my Bluetooth device |
|
|
Poor sound quality |
|
Note: The battery in this speaker cannot be replaced by the user.
Reference file: Insignia NS-SPBTWAVE2-R WAVE 2 Portable Bluetooth Speaker
Additionally, the document applies to other Insignia models: NS-SPBTWAVE2, NS-SPBTWAVE2-XX