Loading ...
Loading ...
Loading ...
RIGHT SIDE
(2) oil filter cover
(3) bolts
(4) oil filter
(5) O-rings
(6) spring
(7) rubber seal
(8) ‘‘OUTSIDE’’ mark
(4) (5)
(3)(2)
(6)
(7)
(2)
(3)
(8)
112
Engine Oil & Filter
Servicing Your Honda
Improper installation of the oil filter can cause serious engine damage.
Remove the oil filter cover ( ) by removing the bolts ( ). Let the
remaining oil drain out. Discard the oil filter ( ) in an approved
manner (page ).
Apply engine oil to a new O-rings ( ) and install them to the oil filter
cover. Then install a new oil filter. Use only the Honda Genuine oil
filter or a filter of equivalent quality specified for your model. Using
the wrong Honda filter or a non-Honda filter which is not of
equivalent quality may cause engine damage.
Reposition the spring ( ) to the engine crankcase and install a new oil
filter with the rubber seal ( ) facing out, away from the engine. You
will see the ‘‘OUTSIDE (TOWARDS FILTER COVER)’’ mark ( )
on the filter body, near the seal.
3.
4.
5.
2
6
7
8
3
4
184
5
１１／０５／１８ １８：１８：１３ ３１ＨＰ４８５０ ０１２１
Loading ...
Loading ...
Loading ...