AIR12B User Manual

Loading ...

is completely dry, it will return to its original operating settings

and function as normal.

“Dry Mode” Operation

If the power supply detects that the Truman Cell is wet, it shuts

down power to the cell and causes the Collector Cell light to

blink rapidly.

1. While the collector cell light is blinking, press and hold the

power button to initiate “Dry Mode”

2. Next, the following will all happen simultaneously:

• Thecenterhalolightsegmentsaboveandbelowthe

powerbuttonwillash3times.

• Theunitwillswitchtomediumspeed.

• TheCollectorCelllightwillstarttoblinkinaslow

pattern.

4. Once in “DryMode”

• Theunitwillrunfor60minutesandthenattemptto

resetthepowersupplytotheTrumanCell.

• Ifthepowersupplysuccessfullyrestarts,theunitwill

returntoitsoriginalspeedandrunasnormal.

• Ifnotsuccessful,itwillgothroughthesameprocess

uptotwomoretimes.

• Ifstillnotsuccessfulafterthethirdtry,thecellislikely

damagedorisshortingoutduetothepresenceofa

foreignobject;itwillreturntotheoriginalspeedand

theCollectorCelllightwillblinkwitharapidblink

patternindenitelyuntiltheunitisreset.

Loading ...

User Manual - Page 12