Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
1. Plug into the mains power supply and switch on
the power mains.
2. Switch on the Electric Throw with ‘On/Off’ button.
The Throw will come at a default setting of 0 heat
and 1 Hour timer.
The LED for timer and temperature will be illuminated.
3. By pressing the Temp button you will be able to
adjust the heat settings from 1–9. 1 being lowest
and 9 being highest. This will be indicated with
the left LED.
4. You can also set the timer to turn the Electric
Throw off after a predetermined time being 1-9
hour or 12 hours. By pressing the Timer button
you will be able to adjust the number of hours
from 1-9 (press once for each hour), pressing one
more time will show “H” illuminated on the heat
controller which indicates the timer is set to 12
hours. This will be indicated with the right LED.
LED Readout
Timer Button
On/Off Switch
Temperature
Button
Operating Your Electric Fleece Throw
HEAT CONTROLLER
The control features an on/off switch and two buttons to control the heat settings
and the timer.
It also has an LED readout for temperature and timer settings.
Loading ...
Loading ...
Loading ...