Loading ...
Loading ...
Loading ...
English 7
STEP 4:
Place the bottom holder into the re-
cesses and push forward until it audi-
bly locks in.
Insert the top holder and push down
all the way.
STEP 5:
Push the high-pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high-pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high-pres-
sure hose from the trigger gun.
This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present in
the water inlet or outlet. This is normal
and will not affect the performance of the
pressure washer.
STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 2:
Insert one end of the high-pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high-pressure hose.
Disconnect:
Push the housing of the quick con-
nect high-pressure outlet toward the
rear and disconnect the high-pres-
sure hose from the unit.
Install the storage for trigger gun
Connect the high-pressure hose to
the trigger gun
OPERATING
INSTRUCTIONS
Loading ...
Loading ...
Loading ...