Loading ...
Loading ...
Loading ...
49-60532-7 13
Care and Cleaning
Beverage Center
Cleaning
the inside
Unplug the beverage center before
cleaning. If the unit is in a built-in location,
remove power at the circuit breaker. Use a
slightly damp cloth or sponge when cleaning
around switches, lights or controls.
Use warm water and baking soda solution—
about a tablespoon (15 ml) of baking soda to
a quart (1 liter) of water. This both cleans and
QHXWUDOL]HVRGRUV7KRURXJKO\ULQVHDQGZLSH
dry.
Other parts of the beverage center unit—
including the door gaskets, full extension
drawers and glass shelves—can be cleaned
the same way.
CAUTION
Avoid cleaning cold
glass shelves with hot water because
the extreme temperature difference may
cause them to break. Handle glass shelves
carefully. Rough handling of tempered
glass can cause it to shatter.
ATTENTION
Évitez de nettoyez les
tablettes de verre avec de l’eau très chaude
lorsqu’elles sont froides puisque les
écarts de température importants peuvent
causer leur bris. Manipulez les tablettes de
verre avec précaution. Une manipulation
brusque du verre trempé peut causer son
éclatement.abc44abc
Drain hole
Periodically check the drain hole and channel
for any debris. If the drain is blocked,
condensation will not drain properly.
To check and clean the drain hole, remove
the bottom two glass shelves. Sweep a damp
cloth along the channel in the back of the
beverage center. Use a finger to sweep
away any debris from the drain hole.
Drain hole
Appearance may vary
In the event
of a power
failure
If the power fails, open the door as infrequently
as possible to maintain the temperature.
Preparing
to move
Secure all loose items such as shelves and
drawers by taping them securely in place to
prevent damage.
Be sure the beverage center stays in an
upright position during moving.
Loading ...
Loading ...
Loading ...