Loading ...
Loading ...
Loading ...
Installation
52
3. Replace the burner nozzles using a 7 mm
socket wrench according to the gas to
be used (see "Nozzle and burner
specification tables").
4. Reposition the burners in their respective
housings.
Adjusting the minimum setting for natural
or town gas
1. Light the burner and turn it to the minimum
position.
2. Remove the knobs by pulling them
upwards.
3. Turn the regulating screw on the side of
the cock stem until a steady minimum
flame is achieved.
The nozzle tightening torque must
be no more than 3 Nm.
Loading ...
Loading ...
Loading ...