Loading ...
INSTRUCTIONS
1. Only the pump and lamp and the electrical cord directly connecting the
two are to come in contact with water. Under no circumstances should the
plug-in transformer or other parts come into contact with water.
2. Do not plug-in or otherwise use this product if any part of it appears to be
damaged or operates abnormally. Have the product examined and
repaired, if necessary, by a qualied electrician.
3. Make a “drip loop” on the electrical cord connecting the pump to the
transformer plug by letting a portion of the cord hang lower than either the
pump or the transformer.
4. Do not let the pump run when not submerged in water. Doing so may
damage the pump. Always submerge the pump rst, and then plug in the
transformer. At the beginning, it probably can’t pump water, because there
is air in the pump and the tube. Don’t worry about it. Please pull out and
insert transformer several times, it will work very well at once.
5. Take care to ensure excess power cords are stowed so as to avoid tripping.
6. Operate the unit only under constant adult supervision and monitoring.
Keep the unit unplugged when not under direct observation.
7. Use this product indoors only.
MAINTENANCE
1. Use this pump with distilled water only. Mineral build up from tap water, or
water from other sources, can ruin the pump.
2. No maintenance is necessary when this product is used in the manner
described in this manual.
3. If debris is caught in the intake vents of the pump, disconnect the pump
from any power sources and rinse the pump under clean running water.