Jenn-Air JJW3430HS

User Manual - Page 3

For JJW3430HS.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
3
Electrical supply junction box should be located 3" (7.6 cm)
maximum below the support surface when the oven is
installed in a wall cabinet. A 1" (2.5 cm) minimum diameter
hole should have been drilled in the right rear or left rear
corner of the support surface to pass the appliance cable
through to the junction box.
NOTE: For undercounter installation, it is recommended
that the junction box be located in the adjacent right or
left cabinet. If you are installing the junction box on rear
wall behind oven, it is recommended that the junction box
be recessed and located in the upper center of the cabinet.
Oven support surface must be solid, level, and flush
with bottom of cabinet cutout.
Floor must be able to support a single oven weight
of 154 lb (70 kg) for 30" (76.2 cm) models.
Floor must be able to support a double oven weight
of 288 lbs (131 kg) for 30" (76.2 cm) models.
IMPORTANT: To avoid damage to your cabinets, check
with your builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate, or sustain other
damage. This oven has been designed in accordance with
the requirements of UL and CSA International and complies
with the maximum allowable wood cabinet temperatures
of 194°F (90°C).
Undercounter Installation (with Cooktop Installed Above):
Ovens approved for this type of installation have an approval
label located on the top of the oven. Refer to Cutout Dimensions
for Ovens Installed Under Cooktop (separate sheet).
Product Dimensions - Single Ovens
Cabinet Dimensions - Single Ovens
Single Oven Undercounter (Without Cooktop Installed Above)
Single Ovens Installed in Cabinet
* NOTE: The cutout height can be between 26
15
/
16
" and 29
7
/
16
"
(68.4 cm and 74.8 cm) for single ovens.
B
D
E
A
C
G
F
A. 29
7
/
8
" (75.8 cm) max. overall height
B. 28
7
/
16
" (72.2 cm) max. recessed width
C. 27
3
/
16
" (69 cm) recessed height
D. 23
1
/
4
" (59.1 cm) max. recessed depth
E. 30" (76.2 cm) overall width
F. 12" (30.5 cm) from back of control panel to start of strain relief
G. 48" (121.9 cm) flexible conduit length
A
B
C
D
E
A. 30" (76.2 cm) min. cabinet width
B. 1
1
/
2
" (3.8 cm) min. top of cutout to underside of countertop
C. 5
1
/
4
" (13.3 cm) bottom of cutout to floor
D. 28
1
/
2
" (72.4 cm) cutout width
E. 28" (71.2 cm) min. cutout height
F
E
B
C
A
D
G
A. 30" (76.2 cm) min. cabinet width
B. 2
3
/
16
" (5.5 cm) top of cutout to bottom of upper cabinet door
C. 32" (81.3 cm) bottom of cutout to floor
D. 28
1
/
2
" (72.4 cm) cutout width
E. 1
1
/
2
" (3.8 cm) min. bottom of cutout to top of cabinet door
F. 28" (71.2 cm)* recommended cutout height
G. 24" (60.7 cm) cutout depth
Loading ...
Loading ...
Loading ...