Loading ...
Loading ...
Loading ...
05
English English
06
Adding a new Camera to the Monitor
The baby camera and baby monitor are paired out
of the box. Refer to the following steps when adding
extra baby cameras or after resetting a baby camera.
1. Enter menu settings, go to
Camera
->
Add Camera
, then
follow onscreen instructions to start the pairing.
2. Press and hold the pairing button on the rear of the
camera for 1 second until a notification prompt is heard.
When volume is set to high, monitor will emit a loud
noise if placed close to the camera. This is normal
phenomenon and can be resolved when camera is
moved away from the monitor.
Camera Placement (on the Wall Mount)
1. Use the monitor to test the viewing angle from your
desired mounting spot.
2. Mark the screw holes with a pencil.
3. Drill 1/5” holes into the wall and then insert the anchors
into the holes.
4. Insert the screws through the mounting holes of the wall
mount and screw into the anchors.
5. Place the camera on the wall mount.
Loading ...
Loading ...
Loading ...