Loading ...
Loading ...
Loading ...
2
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Safety Precautions for your
Electric Throw Rug
Do not switch the throw rug on if moist or wet.
Do not use pins, needles, safety pins or other
sharp items on your electric throw.
Examine periodically for signs of wear or damage
on the throw rug cords. If there are such signs, or
the throw rug has been misused, return it to an
authorised service agent for inspection.
Only use your electric throw with the controls
supplied or marked equivalent.
Not to be used by very young children
(0-3 years), infirm persons, or persons insensitive
to heat.
The appliance is not to be used by young children
over the age of three unless the controls have
been pre-set by a parent or guardian, or unless
the child has been adequately instructed on how
to operate the controls safely.
Ensure that the electric throw is switched off and
unplugged after use.
This electric throw is not intended for use
in hospitals.
If appliance is used on an adjustable bed, check
that the throw rug and cord do not become
trapped or rucked, for example in hinges.
When storing the appliance allow it to cool down
before folding.
Do not crease the appliance by placing items on
top of it during storage.
Should your appliance suffer a thermal or fuse
link rupture (normally identified when the
throw rug stops heating) please return it to the
manufacturer or agent for repair or replacement.
This appliance must not be used by persons
insensitive to heat and other very vulnerable
persons who are unable to react to overheating.
Children under the age of three are not to use
this appliance due their inability to react to
overheating.
Use as an overblanket only.
Important instructions – retain for
future use.
Care Label Symbols
Attention
Instruction Booklet - Please read the instructions thoroughly before use
Loading ...
Loading ...
Loading ...