Loading ...
Loading ...
Loading ...
7.
CONTROLS AND
INDICATORS
A-Programme Selector -
Rotating the knob in both directions it's
possible to select the desired drying
program. To cancel the selections or switch
off the dryer rotate the knob on OFF
B-Buttons -
1.Start/Pause Button
To start the selected program and/or
suspend it.
2.Time cycle selection
It's possible switch a cycle from automatic to
timed , up to 3 minutes after the start of the
cycle. After this selection to reset the
automatic dying functioning is necessary to
switch off the dryer.In case of incompatibility,
all LEDs flash quickly for 3 times.
3.Drying Selection Button
It allows to set the desired dryness level
editable option up to 5 minutes after the
starting of the cycle:
- It leaves the garments
slightly wet to facilitate ironing.
- To get garment ready to
be hang
- For laundry that can be
directly stored
- To get completely dry
garments, ideal for full load.
Ready to Iron :
Dry Hanger :
Dry wardrobe :
Extra-dry :
This appliances is equipped with Drying
Manager Function. On automatic cycles,
each level of intermediate drying, prior to the
reaching the selected one, is indicated by
flashing the light indicator corresponding to
the degree of drying reached.In case of
incompatibility, all LEDs flash quickly for 3
times.
4.Delay Start Button
C- Led
Water tank - It lights up when it's
necessary to empty the condensate water
tank.
Filter cleaning -
cleaning of the filters is requested (the door
and the lower filter.)
These control lights, light up for indicate the
drying phase:
-DRY: It lights up when the drying cycle is
running.
- It light up when the cycle is in the
cooling phase.
-END: It light up when the cycle is done.
D-
SMART TOUCH area - pressing the
START/PAUSE button allows to a previously
downloaded cycle to start whilst the Touch
position is selected on the programme knob
(for downloading cycles from the App see the
relevant section of this user manual).
To postpone the start of the programm for 3h,
6h, or 9h. Opening of the porthole with
delayed start set, after re-closing the porthole,
press start again to resume the counting.
It lights up when the
12
D
220'
120'
90'
60'
NFC ANTENNA
END
3h
6h
9h
DRY
A
B
1
2
3
4
220'
120'
90'
60'
END
3h
6h
9h
DRY
C
Loading ...
Loading ...
Loading ...