Loading ...
Loading ...
Loading ...
Operating Your Heater
HEATER CONTROL SWITCHES
O – Off
҉ – Fan only
I – Low heat
II – Low heat with oscillation
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwiseuntil you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly turn the
knob anti-clockwise until theheater justturns off (you will hear a click).
3. The heater will now cycle on and off to maintain the comfort level you have set.
4. Take note of this setting position for future use.
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. Please follow
the below instructions.
WARNING:In orderto avoidoverheatingorfire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear of
the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING:Never leave thisheaterunattendedwhen inuse.
Ensure heaterison a flat, stable, heat-resistantsurface.
Once the heater is in a safe operating position and all switches are in the off
position, insert the powerplugintothe mains outletand switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will overheat the
plug and socket and could result infire.
Loading ...
Loading ...
Loading ...