Loading ...
Loading ...
Loading ...
28
1
4
Device operation
Wash your hands before touching
breast pump, kit and breasts
and avoid touching the inside of
containers or lids.
After two minutes, the pump
will automatically change to the
Expression Phase.
a. If you let-down (your milk starts to
flow) sooner than 2 minutes, press
the let-down button.
b. If let-down has not happened
during the Stimulation Phase and
the pump has switched to the
Expression Phase, press the let-
down button once to return to
the Stimulation Phase.
7. Pumping
• Research has shown that you will pump
more efficiently – get more milk in less time
– when pumping at Maximum Comfort
Vacuum
™
during the Expression Phase.
• You should reassess your Maximum
Comfort Vacuum throughout your pumping
experience, because it can change during
the different stages of lactation, see step 5
in Section 7.
• Do not tilt or overfill containers
when pumping.
Info
• Always inspect breast shields, breast
shield connectors, white membranes,
yellow valves, and tubing prior to use for
cleanliness. If dirty, see Section 5.1.
• If you experience pain or other symptoms
while pumping seek advice from your
healthcare professional or breastfeeding
specialist. See Section 11 for more
information.
• Do not try and express with vacuum that is
too high and uncomfortable (painful). The
pain, along with potential breast and nipple
trauma may decrease milk output.
• Make sure tubing is not kinked or
pinched while pumping.
• Contact your healthcare professional or
breastfeeding specialist if you can express
only minimal or no milk, or if expression
is painful.
Caution
Loading ...
Loading ...
Loading ...