Loading ...
Loading ...
Loading ...
English28
Installation instructions
Installation instructions
Remove and Replace parts
Disassembling Parts
1. Unhook and remove the grease channel.
2. (Taking care not to scratch the hood)
Place the hood assembly on a large, flat
surface.
Duct Collar (top of hood)
Back of Hood
3. Remove the duct collar from the hood
top. (Save the collar and screws.)
Removing the Blowers(s)
L-Bracket
Plate
Blower
1. Carefully set the hood on its back to
access the bottom.
2. Find the end of the cable assembly
plugged into the bottom left of the
blower, then squeeze and unplug the
connector. (To avoid damaging the
cable-assembly contacts and wires,
always pull by the connector.)
3. Unscrew the cable clamp(s), and remove
the hardware that holds the blower and
L-bracket
.
4. Detach the blower and plate, and set
them aside.
Loading ...
Loading ...
Loading ...