Loading ...
Loading ...
Loading ...
English
21
Preparations
6 Press 22/33 repeatedly to select "VIDEO
SETUP".
7 Select "TV MODE" to "P-SCAN", then OK to
confirm.
The instruction menu appears on the TV.
8 Press 22/33 to highlight OK in the menu and
press OK to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9 Tu rn on your TV progressive scan mode (refer to
your TV user manual).
The below menu appears on the TV.
0 Press 22/33 to highlight OK in the menu and
press OK to confirm.
The setup is complete now and you can start
enjoy the high quality picture.
Note:
If a blank/distorted TV screen appears, wait for
15 seconds for auto recovery.
Step 3: Setting language
preference
You can select your preferred language settings
so that this DVD Micro System will automatically
switch to the language for you whenever you
load a disc. If the language selected is not
available on the disc, the language set by default
will be used instead. But the menu language of
the DVD Micro System cannot be changed once
selected.
ITALIAN
RUSSIAN
1 In stop mode or during playback, press
SYSTEM MENU.
2 Press 22/33/5/4 on the remote control to
select your preferred option.
Move to LANGUAGE SETUP and press
4.
Move to one of the following and press 33.
OSD LANGUAGE (On-Screen Display)
Switches the display language on the TV screen.
Select the language from the displayed list.
AUDIO LANG (DVD only)
Switches the display language of the sound track.
Select the language from the displayed list.
SUBTITLE LANG (DVD only)
Switches the display language of the subtitle.
Select the language from the displayed list.
MENU LANG (DVD only)
Select the language for the DVD menu.
When the selected language is not recorded in
the DVD, one of the recorded languages will be
selected automatically (except for OSD).
You can reset all the DVD settings except for
Rating.
If the language selected is not available on the
disc, the original language designated by each
disc will be selected.
3 Press 5/4 to select a language and press OK.
4 Repeat steps 2~3 for other settings.
To exit the menu
Press SYSTEM MENU again.
pg001-pg039_MCD149-12-Eng 2007.9.13, 15:3521
Loading ...
Loading ...
Loading ...