Loading ...
ENGLISH
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.
com/welcome.
General description (Fig. 1)
A Lid of blender beaker
B Blender beaker
C Sealing ring of blender blade unit
D Blender blade unit
E Chopper beaker
F Chopper blade unit
G Sealing ring of chopper blade unit
H Safety lock
I Motor unit
J Pulse button
K Cord storage groove
L Mains cord
M Filter
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
Never immerse the motor unit in water or any
other liquid, nor rinse it under the tap. Only use
a moist cloth to clean the motor unit.
Warning
Check if the voltage indicated on the appliance
corresponds to the local mains voltage before
you connect the appliance.
To avoid a hazardous situation due to inadvertent
resetting of the thermal cut-out, never connect
this appliance to a timer switch.
Do not use the appliance if the mains cord, the
plug or other parts are damaged.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised
by Philips or similarly qualied persons in order
to avoid a hazard.
Never reach into the blender beaker with
your ngers or an object while the appliance is
plugged in or operates. The cutting edges of the
blade unit are very sharp.
If the blade unit gets stuck, unplug the appliance
before you remove the ingredients that block
the blade unit.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Never let the appliance operate unattended.
Never use the blender beaker or the chopper
beaker to switch the appliance on and off.
Do not use the chopper to grind very hard
ingredients such as nutmeg and Chinese rock
sugar.
Do not use the chopper to mix liquids or to
crush ice cubes. Use the blender to process
these ingredients.
Do not touch the cutting edges of the blade
units when you handle or clean them. They are
very sharp and you can easily cut your ngers
on them.
Caution
Always unplug the appliance before you
assemble, disassemble or make adjustments to
any of the parts.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Never use any accessories or parts from
other manufacturers or that Philips does
not specically recommend. If you use such
accessories or parts, your guarantee becomes
invalid.
Do not exceed the maximum level indicated
on the blender beaker and the chopper
beaker.
Do not exceed the quantities indicated in the
tables.
Let hot ingredients cool down before you put
them in the blender beaker or chopper beaker
(max. temperature 80°C).
Never operate the blender for more than 1
minute without interruption.
Never operate the chopper for more than 30
seconds without interruption.
Safety features
Built-in safety lock
This feature ensures that you can only switch on
the appliance if you have assembled the blender
beaker or the chopper beaker correctly on the
motor unit. If the blender beaker or chopper
beaker is assembled correctly, the built-in safety
lock is unlocked.
Thermal cut-out
The appliance is equipped with a thermal cut-out
that automatically cuts off the power supply to the
appliance if it overheats.
If the appliance suddenly stops running:
1 Remove the plug from the wall socket.
2 Let the appliance cool down for 30 minutes.
3 Put the plug in the wall socket.
4 Switch on the appliance again.
Note: Contact your Philips dealer or an authorised
Philips service centre if the thermal cut-out is
activated too often.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards
regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientic evidence available today.
Before first use
1 Clean all parts except the motor unit (see
chapter ‘Cleaning’).
Using the appliance
Blender
The blender is intended for:
Blending uids, e.g. dairy products, sauces, fruit
juices, soups, mixed drinks, shakes.
Mixing soft ingredients, e.g. pancake batter.
Pureeing cooked ingredients, e.g cooked beans.
Preparing baby food.
Do not touch the cutting edges of the blender
blade unit when you handle or clean it. They are
very sharp and you can easily cut your ngers on
them.
1 Make sure the sealing ring is placed properly
onto the blender blade unit.
2 Insert the blender blade unit into the bottom
of the blender beaker (1). Turn the blade unit
clockwise to x it (2) (Fig. 2).
3 Put the ingredients in the blender
beaker (Fig. 3).
See the table for the recommended quantities.
Do not ll the blender beaker beyond the MAX
indication.
-
-
-
-
-
-
-
-
-
-
Never ll the blender beaker with ingredients
that are hotter than 80°C.
Ingredients blender Quantities
fruit 20g
vegetables 60g
vegetable juice 100g vegetables + water
(optional)
milkshake 120g fruit + 250ml milk
ice cubes max. 6 small ice cubes
soups 400ml water
4 Place the blender beaker on the motor unit
(1). Turn the blender beaker clockwise to x
it (‘click’) (2) (Fig. 4).
Do not exert too much pressure on the blender
beaker.
5 Put the lid on the beaker (1). Turn the lid
until the sieve is located in front of the spout
(2) (Fig. 5).
6 Put the plug in the wall socket and press the
pulse button.
Hold the motor unit rmly with both hands
when the appliance operates.
Never operate the blender for more than 1
minute without interruption.
If you have not nished blending after 1 minute,
release the pulse button and wait 1 minute before
you continue. If the appliance becomes hot, let it
cool down before you continue.
Never reach into the blender beaker with your
ngers or an object (e.g. a spatula) while the
blender operates.
Tips
If the ingredients stick to the wall of the
blender beaker, unplug the appliance and
remove the ingredients from the wall with a
spatula (Fig. 6).
To avoid spillage, never ll the beaker above
the MAX indication (0.6 litres).
Cut solid ingredients into smaller pieces
(1-2cm) before you put them in the blender
beaker. Do not process a large quantity of solid
ingredients at the same time. Process a series
of small batches instead.
You can pour liquid ingredients (e.g. oil) into
the blender beaker through the opening in the
lid while the appliance operates (Fig. 7).
Chopper
The chopper is intended for chopping
moist ingredients such as meat, onion, garlic
etc (Fig. 8).
Do not touch the cutting edges of the chopper
blade unit when you handle or clean it. They are
very sharp and you can easily cut your ngers on
them.
Do not use the chopper to grind very hard
ingredients such as nutmeg and Chinese rock
sugar.
1 Cut the ingredients into smaller pieces
(approx. 1-2cm) and put them in the chopper
beaker (Fig. 9).
See the table for the recommended quantities.
Do not ll the chopper beaker beyond the MAX
indication.
-
-
-
-
-
4222.002.7032.3
2/9
Loading ...
Loading ...
Loading ...