Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
9
To ensure safe operation, use the wine conditioning unit only
when it has been installed.
The wine conditioning unit must be disconnected from the power
supply during installation, side-by-side heater installation, mainte-
nance and repair work. The appliance is only disconnected from the
power supply if:
– the circuit breaker has been tripped, or
– the power cord has been unplugged. Pull on the plug and not on
the cord when removing it from the outlet.
Installation, repair, and maintenance work should only be per-
formed by a Miele-authorized service technician.
Work by unqualified persons could be dangerous and may void the
warranty.
Repairs and other work performed by unauthorized persons could
be dangerous and may void the warranty.
Defective components should only be replaced by Miele original
parts. Only with these parts can the manufacturer guarantee the
safety of the appliance.
Proper use
The wine conditioning unit is designed for use within a certain cli-
mate range (ambient temperatures) and should not be used outside
this range. The climate range for your wine conditioning unit is stated
on the data plate inside the appliance. Installing it in a room with too
low an ambient temperature will cause the compressor to shut down
for longer periods of time so that the unit cannot maintain the re-
quired temperature.
Do not cover or block the air vents. This can impair the efficiency
of the appliance, increase the power consumption and cause dam-
age to the appliance.
Loading ...
Loading ...
Loading ...