Loading ...
Loading ...
Loading ...
SETTINGS (Menu) Item Setting values Default Explanation
Sound
Equalizer
Bypass / Auto /
Manual
Auto
Adjusts the volumes for the low-frequency, middle-frequency, and
high-frequency ranges of the audio. When this is “Auto”, they stay
synchronized with the main volume and perform hearing correction
for the auditory response of the human ear.
Manual
High
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
0.0 dB
Adjusts the volume of the high-frequency range of the audio
output.
Mid
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
0.0 dB
Adjusts the volume of the medium-frequency range of the audio
output.
Low
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
0.0 dB Adjusts the volume of the low-frequency range of the audio output.
Speaker Type
Compact /
Bookshelf /
Floor standing
/
In-ceiling / In-wall
Bookshelf
Adjusts the effects of features such as Bass Extension and
Adaptive EQ for optimal results depending on the speaker type.
“Compact”: optimizes for small speakers.
“Bookshelf”: optimizes for bookshelf speakers.
“Floor standing”: optimizes for large speakers that are placed on
the floor.
“In-ceiling”: optimizes for speakers embedded in the ceiling.
“In-wall”: optimizes for speakers embedded in walls.
Volume
L/R Balance
-12 to 0 to +12
(steps of 1)
0
Adjusts the balance of the volume between the left and right
speakers.
Initial Volume
Mode
Off / On Off
Enables/disables setting of the initial volume when the unit is
turned on.
Level
Mute,
-80 dB to +0.0 dB
(0.5 dB steps)
-40.0 dB Sets the initial volume for when the unit is turned on.
Max Volume
-20 dB to +0.0 dB
(0.5 dB steps)
0.0 dB
Sets an upper limit for the volume levels to which the unit can be
adjusted using the remote control, etc.
Subwoofer Volume
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
0.0 dB Makes fine adjustments to the volume of the subwoofer.
Input Setting
Input Trim
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
0.0 dB Compensates for volume differences between input sources.
Auto Play
Off / On / Auto different for every input source
Sets whether or not audio is automatically played back from
servers, USB devices, etc. when the unit is turned on or the input
source is switched.
“Off”: always starts up with playback stopped.
“On”: always begins playing back the content that was played the
previous time.
“Auto”: begins playback if audio was currently being played back
when the unit was turned to standby.
Note
The setting value is different for every input source or service.
User Interface
LED Dimmer
0-3 3 Adjusts the brightness of the LED (“3” is the brightest).
En
32
Loading ...
Loading ...
Loading ...