Loading ...
Loading ...
Loading ...
820726
64
Maximum or nominal load applies to laundry prepared pursuant to the IEC 60456 standard.
Due to deviations in terms of type and amount of laundry, spinning, power supply
oscillation, and environment temperature and humidity, the programme duration and power
consumption values measured at the end user may differ from the ones stated in the table.
Washing machine with a BPM motor (type PS15/3XXXX)
(see chapter »WASHING MACHINE DESCRIPTION/Technical information«.)
Programme
Max. load
[kg]
Temp.
[°C]
Spinning
[rpm]
Residual
moisture
[%]
Washing time
[minutes]
Water
consumption
[L]
Power
consumption
[kWh]
Cotton
430 mm
A+++ POWER SAVE*
6/3** 60 800-1400 62-53 214/175 49 0,74/0,62**
A+++ POWER SAVE*
6/3** 40 800-1400 62-53 195/171 49 0,55/0,47**
465 mm
A+++ POWER SAVE*
8/ 4** 60 800-1400 62-53 214/175 55 0,95/0,85**
A+++ POWER SAVE*
8/ 4** 40 800-1400 62-53 195/171 55 0,75/0,70**
A+++ POWER SAVE*
7/3,5** 60 800-1400 62-53 214/175 51 0,81/0,70**
A+++ POWER SAVE*
7/3,5** 40 800-1400 62-53 195/171 51 0,65/0,59**
545 mm
A+++ POWER SAVE*
8/ 4** 60 800-1600 62-44 214/175 54 0,90/0,85**
A+++ POWER SAVE*
8/ 4** 40 800-1600 62-44 195/171 54 0,75/0,70**
A+++ POWER SAVE*
7/3,5** 60 800-1600 62-44 214/175 50 0,86/0,73**
A+++ POWER SAVE*
7/3,5** 40 800-1600 62-44 195/171 50 0,65/0,58**
610 mm
A+++ POWER SAVE*
9/4,5** 60 1200-1600 55-44 214/175 57 1,10/0,95**
A+++ POWER SAVE*
9/4,5** 40 1200-1600 55-44 195/171 57 0,80/0,76**
* Test programme pursuant to EN 60456 with maximum spinning rate
** Half load
Cotton 40°C POWER SAVE
and 60°C POWER SAVE are standard programmes to which the
data on the energy label pertains. These programmes are suitable for normally soiled laundry, and
they are the most efficient programmes in terms of water and power consumption. Therefore, actual
water temperature may differ from the nominal cycle temperature.
LOW STANDBY MODE
P o = weighted power when off [W] < 0,5
P I = weighted power when in standby [W] < 0,5
T I = standby time [min] 5,00
820726en.indd 64820726en.indd 64 23. 10. 2020 14:02:5123. 10. 2020 14:02:51
Loading ...
Loading ...
Loading ...