EGO SNT2102 OPERATOR'S MANUAL 56-VOLT LITHIUM-ION CORDLESS SNOW BLOWER

Loading ...

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210026

MAINTENANCE

WARNING:

To avoid serious personal injury, always remove the battery pack(s) from

the snow blower before cleaning or performing any maintenance.

WARNING:

When servicing, use only identical replacement parts. Use of any other

parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs

should be performed by a qualied service technician.

NOTICE: Periodically inspect the entire product for damaged, missing, or loose parts such as

screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this

product until all missing or damaged parts are replaced.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to

damage from various types of commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake uids, gasoline, petroleum-based products,

penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken, or

destroy plastic which can result in serious personal injury.

LUBRICATING THE MACHINE

All of the bearings in this product are lubricated with a sufcient amount of high grade

lubricant for the life of the unit under normal operating conditions. Therefore, no further

bearing lubrication is required.

REPLACING THE SCRAPER BAR

WARNING:

Make sure to turn

off the bail switch and remove the

battery pack(s) before performing any

maintenance task on your snow blower.

1. The scraper bar is located at the

bottom of the snow blower beneath

the auger (Fig. 23).

Scraper Bar

Loading ...

EGO SNT2102 POWER+ 56-Volt 21-in Single-Stage Brushless Cordless Electric Snow Blower