Loading ...
Loading ...
Loading ...
4
DIAGRAMS
1. Temperature control
2. Steam trigger
3. Steam pipe
4. Temperature light
5. Reservoir
6. Hose clip
7. Plug storage
8. Resin lter (inside reservoir)
9. On/o button
10. Warning light/reset button
11. Steam Control
BEFORE FIRST USE
• Remove any labels, stickers or packaging from the iron and soleplate.
• Before using the iron for the rst time, or if it’s not been used for a long time, iron a scrap piece of
cotton (an old towel is ideal) to remove any accumulated residues.
• Don’t worry if the iron smokes a bit at rst, it will soon stop as the manufacturing residues evaporate.
AUTO SHUTOFF
If you don’t press the steam trigger for 8 minutes your iron’s auto shut-o feature will operate. The iron will
beep and the temperature light will ash to tell you that it is in auto shut-o mode. To cancel the auto
shut-o mode, press the steam trigger. Note that your iron will need time to heat up again to the selected
temperature. Wait until the temperature light has stopped ashing before resuming ironing.
FILLING/REFILLING
• Don’t add anything to the water and don’t use water with anything added to it. When the water is
converted to steam, chemicals, perfume, and other additives will coat the inside of the steam
chamber and shorten the life of the iron.
1. Remove the reservoir by pulling it away from the body of the steam generator using the grip on the
front of the reservoir .
2. Fill the reservoir to the max mark. Do not exceed the max mark.
3. Ret the reservoir into the base unit.
PRELIMINARY SETTINGS
1. Put the iron on top of the base unit.
2. Put the plug into the power socket (switch the socket on, if it’s switchable).
3. Turn the unit on by setting the on/o button to I.
4. Press and release the temperature button to select the temperature you want.
5. The colour of the temperature light depends on the setting. The colours are:
Temperature light colour Dot setting
Blue
•
Pink
••
Green
•••
Red Max
6. The temperature light will ash while the iron is heating up, then remain on when the set
temperature is reached.
7. The last setting you select will be stored and will be automatically selected the next time you switch
on your iron.
Loading ...
Loading ...
Loading ...