Loading ...
Loading ...
Loading ...
25
|
ENG
TROUBLESHOOTING
UNABLE TO COMPLETE ADAPTIQ
®
AUDIO CALIBRATION
WITH YOUR SOUNDTOUCH
®
300 SOUNDBAR
If you can't complete ADAPTiQ audio calibration with your SoundTouch
®
300
soundbar, listen to the voice prompts for the following error messages:
ERROR MESSAGE PROBLEM WHAT TO DO
1
The microphone on
the ADAPTiQ headset
can't detect sound.
Secure all cables.
Disconnect the ADAPTiQ headset cable
and reconnect it firmly into the soundbar’s
a connector.
Ensure the microphone opening on the top
of the ADAPTiQ headset is not blocked.
Your ADAPTiQ headset may be damaged.
Call Bose customer service for
replacement parts.
2
The room is too loud. Re-run ADAPTiQ audio calibration when the
room is quiet.
3
The ADAPTiQ headset
is too close to
the speakers.
Move the ADAPTiQ headset farther away
from the speakers.
4
The listening locations
are too similar.
Move 1 – 2 ft. (0.3 – 0.6 m) away from your
previous listening location.
5
The ADAPTiQ
headset cannot take
measurements due
to movement.
Hold your head still.
After correcting your problem, you must re-run ADAPTiQ audio calibration
(see page 17).
If you hear a dierent error message, contact Bose customer service for further
instructions.
Loading ...