Loading ...
Loading ...
Loading ...
www.kegco.com 8 1-888-980-4810
Troubleshooting
There are many common issues you may experience with your kegerator that can be solved very easily, without the
need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:
PROBLEM
POSSIBLE CAUSE
Kegerator does not operate
Not plugged in or the appliance is turned off.
The circuit breaker tripped or a fuse has blown out.
The thermostat is set too high.
The kegerator is in defrost cycle.
Kegerator is not cold enough
Check the temperature control setting.
The circuit breaker tripped or a fuse has blown out.
External environment may require a higher setting.
There is too much warm product in the kegerator.
Air flow is being blocked.
The door is opened too often.
The door is not closed completely.
The door gasket is not sealing properly.
The condenser coil is dirty.
The evaporator coil has iced over.
Condensing unit runs for long periods of time
There is too much warm product in the kegerator.
The door is opened too often.
The door is not closed completely.
The door gasket is not sealing properly.
The condenser coil is dirty.
The evaporator coil has iced over.
The light does not work
Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
Vibrations
Check to assure that the Kegerator is on a level surface.
The door will not close properly
The kegerator is not on a level surface.
The gasket is dirty.
The shelves are out of position.
Loading ...
Loading ...
Loading ...