Philips MCB700/05 Micro Hifi System

User Manual - Page 17

For MCB700/05.

PDF File Manual, 22 pages, Read Online | Download pdf file

MCB700/05 photo
Loading ...
Loading ...
Loading ...
English
17
FM Radio Reception
Tuning to radio stations
1 Press SOURCE on the top of the system or
FM on the remote to select FM.
2 Press and hold the control knob on the front
panel of the system to the left or right
(corresonding to S/T) or 5 /6 on the
remote.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press the control
knob on the front panel of the system to the left
or right (corresonding to S/T) or 5 /6
on the remote briefly and repeatedly until you
have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Automatic programming will start with from
preset 1 and stop a the last programmed station.
All the former programmed radio stations will
be overridden.
1 Press PRESET -/+ on the top of the system or
¡ / on the remote to select the preset
number where programming should start.
Note:
If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press and hold the control knob on the front
panel upward (corresponding to PROGRAM)
or PROG on the remote for more than 2
seconds to activate programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength: RDS followed by FM. The last preset
automatically stored will then be played.
Manual programming
1 Tune to your desired station (see “Tuning to
radio stations”).
2 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote to activate programming.
3 Press PRESET -/+ on the top of the system or
¡ / on the remote to allocate a number
from 1 to 20 to this station.
4 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote again to confirm the
setting.
The preset number and the frequency of the
preset station are shown.
pg001-021_MCB700_05 2006.10.25, 17:1117
Loading ...
Loading ...
Loading ...