Loading ...
Loading ...
Loading ...
17
erminals
connected to the
terminal marked “N” (neutral), or coloured
o wn wire must be connected to the
terminal marked “L” (live), or coloured red.
nsta la
hased is of a suitable size for the
chosen installation area. In addition check whether there is an
is
o all necessary masonry work prior to the fitting of the
cooker hood.
o l electrical connections are carried out by a suitably
qualified person.
o g installation of the cooker hood the grease
filters should be removed.
o d insure that there is no transit
packaging or any other materials, such as packets of screws,
e
o ible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear wall and
o er that
surface with a protective covering and place all cooker hood
o secure the hood to most types of
walls and ceilings. However a qualified technician must verify the
l
o As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the t
in your spur box, please proceed as follows:
o The blue wire must be
black.
The bro
l tion Before beginning i
o Check that the product purc
electrical socket available that will be accessible once the hood
mounted. If the product is going to be used in extraction mode,
then there should also be space to connect a ducting hose to the
outside.
Carry out
Ensure that al
Before commencin
Check inside the product an
guarantees etc. These should be removed and kept for futur
use.
If poss
ceiling. If this is not possible, then a thick, protective covering
should be placed over the worktop, hob top or cooker. This will
help to protect these surfaces from damage and debris.
Select a flat surface for assembling the cooker hood. Cov
parts and fittings on to it.
Rawl plugs are provided to
suitability of the materials, in accordance with the type of wal
and ceiling. The wall and ceiling must be strong enough to take
the weight of the hood.
Loading ...
Loading ...
Loading ...