Loading ...
Loading ...
Loading ...
12
Cybex Owner’s Manual
11. Raise guide rod up through mounting hole and install the upper snap ring.
12. Lower guide rod and secure lower snap ring. Repeat for the opposite guide rod.
Belt Routing
1. Verify belt is routed through top of pulley bracket and then route end of belt down to the top
weight.
2. Slide belt through slot in belt clamp.
3. Verify that the position of the belt clamp (on the top weight) is aligned properly with the top
pulley bracket (on the machine.) The belt must have a straight path from the pulley to the belt
clamp. Figure shows the top view, looking from the top pulley down to the top plate. Slide belt
through slot in belt clamp.
Top Pulley
Increment Weight
Adjusting Knob
Belt
Set Screw
Insert
4. Verify belt and insert are installed properly.
Correct belt routing Wrong belt routing
Stem
Belt
Insert
Stem
Belt
Insert
5. Pull belt tight and secure belt to clamp with the two set screws. Torque set screws 300-350 in-
lbs.
Belt clamp
Belt
Belt clamp
insert
Set screws
Loading ...
Loading ...
Loading ...