Loading ...
Loading ...
Loading ...
6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install the new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
10.
Fill the crankcase with the recommended
oil (2 P. 50, 2 P. 125) and install the oil fill
cap.
Required oil
When changing oil & engine oil
filter:
3.9 L (4.1 US qt, 3.4 Imp qt)
When changing oil only:
3.8 L (4.0 US qt, 3.3 Imp qt)
11.
Check the oil level. 2 P. 65
12.
Check that there are no oil leaks.
20170830133037_31MGC6300_enc_BOOK Page 71 Wednesday, August 30 2017 13:36:27 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
68
Rubber seal
Oil filter
Loading ...
Loading ...
Loading ...