Loading ...
Loading ...
Loading ...
REFRIGERATOR TEMPERATURE SELECTION
The temperature of the appliance can be adjusted
by pressing the “Set” button. Each time the button is
pressed the light will indicate the current setting.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
4
OPERATING INSTRUCTIONS
NOTES
• Adjusting the slider to the right will increase cold
air to the refrigerator and decrease cold air to the
freezer.
• Adjusting the slider to the left will increase cold air to
the freezer and decrease cold air to the refrigerator.
• In situations where the ambient temperature is higher
than 35°C (95°F) the slider should be set closer to
the right hand side of the dial.
• In situations where the ambient temperature is
between 16°C - 35°C (60.8°F and 95°F) the slider
should be set to the center position.
• In situations where the ambient temperature is lower
than 16°C the slider should be set closer to the left
hand side of the dial.
• Do not set the thermostat to 5 and the slider to the
left as this can cause the refrigerator to under cool,
especially when ambient temperatures are over 35°C
(95°F).
• Do not set the thermostat to 1 and the slider to
the right where there is food in the freezer as the
temperature may not be cold enough to keep it
frozen.
• In an environment with high humidity or if the
appliance is opened frequently, a small amount
of water may accumulate in the bottom of the
refrigerator. This can be removed by wiping with a
cloth.
DOOR OPEN ALARM
If the refrigerator door of the appliance is left open for
more than 3 minutes, an alarm will sound.
Press the set button on the control panel to silence the
alarm for 3 minutes.
The alarm will stop sounding once the refrigerator door
is closed.
APPLIANCE FAILURE ALARM
On the control panel if the number 1, the number 3,
or the number 5 are fl ashing, this indicates a failure in
the appliance. Contact Danby consumer care for more
information.
FREEZER TEMPERATURE SELECTION
The temperature control slider on the back of
the refrigerator compartment is a vent that will
decide how much cold air fl ows from the freezer
compartment and into the refrigerator compartment.
It is recommended to keep this slider in the middle
position.
STANDBY MODE
Standby mode can be used in times when you do
not need to use the appliance but you do not need
to unplug it.
Setting the refrigerator to standby mode will turn
off the cooling function but the interior light will still
work.
Ensure that all foods are removed from the
refrigerator when set to standby mode to avoid
spoilage.
Loading ...
Loading ...
Loading ...