Loading ...
Loading ...
Loading ...
24
3.
Installation of water tank components
The hanging slot on the water tank components shall be in alignment with the suspension loop
on the inner layer, and the sealing ring at the bottom of water tank shall be in alignment with
the entrance of water value components, and then insert them into the corresponding positions
in the direction of 45° of oblique downward by hands.
Cleaning of water receiving tank
Use wet cloth to wipe it and then use the dry cloth.
4.2
Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has
become more pronounced since the introduction of CFC free gases. This is not a fault and will
not affect the performance of your unit. This is the compressor motor working, as it pumps the
refrigerant around the system.
4.3
Tips for Keeping Food in the Unit
♦
Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
bacterial transfer. Keep raw meats/fishes in a container which is large enough to collect juices
and cover it properly. Place the container on the lowest shelf.
♦
Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the
unit are kept cool.
♦
To prevent transfer of favours and drying out, pack or cover the food separately. Fruit and
vegetables do not need to be wrapped.
♦
Always let pre-cooked food cool down before you put in the unit. This will help to maintain the
internal temperature of the unit.
♦
To prevent cold air escaping from the unit, try to limit the number of times you open the door.
We recommend that you only open the door when you need to put food in or take food out.
4.4
Change the Light Bulb
Lamp replacement by professionals
Loading ...
Loading ...
Loading ...