Loading ...
Loading ...
Loading ...
4 Operating the appliance
4.10 Bridging function
The bridging function allows two individual cooking zones lying one behind the
other to be switched on together and to be adjusted together.
Switching the bridging function on
▸ Touch both sliders at the same time.
– Illuminates next to the slider.
▸ Set the desired temperature.
If, when the bridging function is switched on, a cooking zone is
already running, the power level and operating time of this cooking
zone will be taken over for both zones. If both cooking zones are
already running, the operating times are cleared and flashes in the
power level displays.
Switching the bridging function off
▸ Touch both sliders at the same time.
– Both cooking zones revert to the previous settings.
– Each cooking zone can be regulated individually again.
4.11 Automatic boost
Do not leave the hob unattended when using the automatic boost.
Risk of boiling over, burning on and igniting!
All the cooking zones are equipped with a selectable automatic boost. With
this function, a cooking zone heats at power level for a certain length of time
(see table). Then it automatically switches back to the power level set.
The automatic boost function must be activated anew each time a
cooking zone is switched on.
Power level /
function
1 2 3 4 5 6 7 8/9
Automatic boost
in mins.:secs.
0:40 1:15 2:00 3:00 4:15 7:15 2:00 3:15
If during the automatic boost a higher power level is selected, the dur-
ation will change automatically.
21
Loading ...
Loading ...
Loading ...