Loading ...
Loading ...
Loading ...
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country. You nd its phone number in the worldwide
guarantee leaet. If there is no Consumer Care Centre in your country, go
to your local Philips dealer.

1 Thesuctionpowerisinsufcient
- Perhaps the dust container is full.
If necessary, empty the dust container.
- Perhaps the lters need to be cleaned or replaced.
If necessary, clean or replace the lters.
- Perhaps the suction power slide on the handgrip is open.
Close the slide.
- Perhaps the electronic suction power control is set to a low setting.
Set the control to a higher setting.
- Perhaps the nozzle, tube or hose is blocked up.
To remove the obstruction, disconnect the blocked-up item and connect it
(as far as possible) the other way round. Switch on the vacuum cleaner to
force the air through the blocked-up item in opposite direction.
2 The dust container full indicator is on.
- The dust container is full and you have to empty and clean it. Empty
the dust container and clean the lter cone, HEPA dust container lter
and foam lter.
3 Specictypesonly:hairsareentangledaroundthebrushinsidethe
mini turbo brush.
- Clean the mini turbo brush. See chapter ‘Cleaning’, section ‘Cleaning the
mini turbo brush’.
ENGLISH 17
Loading ...
Loading ...
Loading ...