Loading ...
IMPORTANT SAFETY
INSTRUCTIONS
Iftheinformationinthismanualisnotfollowed
exactly,a fireorelectricalshockmay resultcausingproperty
damage, personalinjuryor death.
• INSTALL ANTI-TIP
DEVICE PACKED WITH
RANGE
• SEE INSTALLATION
INSTRUCTIONS
Important Notes to the Installer
1. Read all instructions contained in these installation
instructionsbefore installingrange.
2. Removeallpackingmaterialfromtheovencompartments
before connectingthe gas and electrical supplyto the
range.
3. Observe all governing codes and ordinances.
4. Be sure to leave these instructions with the consumer.
Important Note to the Consumer
Keep these instructions withyour owner's guide for future
reference.
As when using any appliance generating heat, there are
certain safety precautions you should follow. These are
listed in the Use & Care Manual. read it carefully.
Be sure your range isinstalled and grounded properly by
a qualified installer or service technician.
Make sure the wall coverings around the range can
withstand the heat generated by the range.
To eliminate the needto reach overthe surface elements,
cabinet storage space above the elements should be
avoided.
Before Starting
Tools You Will Need
For leveling legs and Anti-Tip Bracket:
Adjustablewrenchor channel lockpliers
5/16" Nutdriveror Flat Head Screwdriver
Electric Drill & 1/8" Diameter Drill Bit (Masonry Drill Bit if
installing in concrete)
For electrical supply connection:
1/4"& 3/8" Socket driver or Nutdriver
Additional Materials You Will Need
Power Supply Cord or
Copper Electrical Wiring &Metal Conduit (forhard wiring)
Normal Installation Steps
1, Anti-Tip Bracket Installation Instructions
Important Safety Warning
To reducethe riskoftippingof therange, therange mustbe
securedtothefloorbyproperlyinstalledanti-tipbracketand
screws packed with the range. Failureto installthe anti-tip
bracketwillallow the rangetotip over ifexcessiveweightis
placed on an open dooror if a child climbsupon it. Serious
injurymightresultfrom spilledhot liquidsor from the range
itself.
If range is ever moved to a different location,the anti-tip
brackets must also be moved and installed with the range.
Instructions are provided for installation in wood or cement
fastenedtoeitherthefloororwall. Wheninstalledtothewall,
make surethatscrewscompletelypenetratedrywallandare
securedinwoodormetal. Whenfastening tothefloororwall,
be sure that screws do not penetrate electrical wiring or
plumbing.
A. Locate the Bracket Using the Template- (Bracket may
belocatedoneitherthe leftorrightside oftherange. Use
the informationbelowtolocatethe bracketiftemplate is
notavailable). Mark the flooror wall where leftor right
sideoftherangewillbelocated.Ifrearofrangeisagainst
thewallornofurtherthan1-1/4"from wallwhen installed,
you may usethewall orfloor mountmethod. If molding
is installedand does not allowthe bracket to fit flush
againstthewall,remove moldingormountbracket tothe
floor. Forwall mount,locate the bracket by placingthe
backedge ofthe template againstthe rear walland the
side edge oftemplate onthemark madereferencingthe
sideofthe range. Place bracketon top oftemplate and
marklocationofthe screwholesinwall. Ifrear ofrange
isfurtherthan 1-1/4"from thewallwhen installed,attach
brackettothe floor. Forfloormount, locatethe bracket
byplacingbackedge ofthe template where the rear of
the rangewillbe located. Markthe locationofthescrew
holes,shown in template.
2
Loading ...
Loading ...
Loading ...