Loading ...
Loading ...
Loading ...
8 English
GETTING STARTED
BASE ASSEMBLY Screwdriver required.
1. Assemble the two base halves together, pressing the two halves
together until ush. You should hear a slight click when fully
connected.
2. Assemble the base to the bottom of the tower. There is an alignment
pin (A) located on the bottom of the tower and an alignment recess
(B) located on the base. An arrow on bottom of base indicates
alignment recess location. To ensure correct assembly, position base
onto bottom of tower with (A) and (B) aligned.
3. Attach base to tower using 8 screws provided.
4. Route the powercord through cord path
located on bottom of base.
x8
A
B
Loading ...
Loading ...
Loading ...