Loading ...
Loading ...
Loading ...
6
Subwoofer Wire Connection
The subwoofer features a dual voice coil driver with 4 wires, one
pair for each of the amplier channels. red (+) and black (-) are
used for the right channel, white (+) and green (-) for the Left
channel. The subwoofer can be connected at any point along the
daisy chain e.g. beginning, middle, end or anywhere in-between.
However, locating the subwoofer mid-way in the daisy chain will
produce an equal amount of bass for the speakers on either side
of the sub. The subwoofer needs to be connected in the same
manner as the satellites speakers (see Figure 6).
After all satellites and subwoofer connections are completed,
connect the wires to your receiver or amplier (see Figure 3 &
Figure 5).
IMPORTANT: THE SUBWOOFER HAS DUAL VOICE COILS, ONE FOR
THE LEFT CHANNEL AND ONE FOR THE RIGHT CHANNEL,, IT IS
CRITICAL THAT THE POSITIVE AND NEGATIVE WIRES BE CONNECTED
CORRECTLY FOR BOTH CHANNELS. IF EITHER CHANNEL IS CONNECTED
INCORRECTLY NO LOW FREQUENCY SOUND WILL
BE PRODUCED.
IMPORTANT: BE SURE NOT TO LET ANY STRAY’+’ AND’-’ STRANDS
TOUCH EACH OTHER. TOUCHING STRANDS WILL CAUSE A SHORT-
CIRCUIT WHICH COULD DAMAGE YOUR AMPLIFIER.
Turn your source and amplier/reciever on and test the system with
your favorite music. If the speakers are operating properly, rell the
wire trench and enjoy your new Sonance Garden Series System.
Figure 5
From amp
To the next
speaker
Figure 6
From amp
To the next speaker
Loading ...
Loading ...