Loading ...
Loading ...
Loading ...
en PowerBoost function
14
vPowerBoost function
Power Boost f unc t i on
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise, the
› symbol and the
heat setting will flash in the hotplate display; the
previously selected heat setting will then be set
automatically without activating the function.
Activating
1. Select the required heat setting.
2. Touch the boost G symbol for the selected hotplate.
› lights up in the display.
The function is activated.
Deactivating
Touch the boostG symbol.
The › display goes out and the hotplate switches back
to the previously selected heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
AChildproof lock
Ch i l d p r o o f lock
You can use the childproof lock to prevent children
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol D for approximately
4 seconds. The indicator next to the symbol D lights
up for 10 seconds. The hob is locked.
To deactivate: press the symbol D for approximately
4 seconds. The lock is now deactivated.
The hob is locked
If a hotplate is programmed with the hob locked, the
following will occur:
■ On the hotplate's indicator, ‹ will flash or the
residual heat indicator will flash alternately with ‹.
■ The indicator next to the D symbol will light up.
Switch off the hotplate. Switch off the lock.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
bAutomatic safety cut-out
Au t o mat i c saf et y cut - out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating. ”, ‰ and the residual heat
indicator œ or • flash alternately in the hotplate display.
If the hotplate control is turned to position 0, the display
switches off. The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours). .
Loading ...
Loading ...
Loading ...