NO532H User Manual

Loading ...

Mark Levinson

Internal Web Page

Network Setup

Parameters

When connected to a computer, the Nº500H series has an internal

Web page that provides access to:

• Network Setup – allows the user to modify the network setup

parameters. Accessing the internal Web page is the ONLY way

to modify the network setup parameters of the Nº500H series

ampliﬁer.

• Status Information – provides basic status information of

the Nº500H series ampliﬁer.

• Error Reporting – tracks system-related error messages for

the Nº500H series ampliﬁer. This page is a diagnostics tool for

Mark Levinson Customer Service use.

The ampliﬁer MUST be connected to a computer via the Ethernet

port before you can access the internal Web page. Continue to the

nextsection–“NetworkSetup”–forfurtherinstructions.

The Web page also has a Restore Defaults button, which resets the

parameters to their factory default values. Clicking the Restore

Defaults button displays a pop-up asking for conﬁrmation; click Yes

to restore the factory default values.

Accessible only through the Nº500H series internal Web page, the

network setup parameters include:

• Static IP Address–providesaxedIPaddress.ThisIP

address is NOT automatically selected; it must be entered.

If DHCP is on, then this parameter is not used. IP address

192.168.50.5 is the factory default value for the Nº500H series.

Loading ...

Mark Levinson NO532H Power Amplifier