Loading ...
Loading ...
Loading ...
Water Filtration System: (Not Included. Available at
your favorite retailer or visit the web site
www.mrcoffee.com)
Your coffeemaker has been designed
to use the MR. COFFEE
®
water filtration
system. Using the MR. COFFEE
®
carbon-
based water filter in the MR. COFFEE
®
coffeemaker during the brewing process
helps remove up to 97% of the chlorine
from the water and improves the taste
of your coffee.
First, look for the MR. COFFEE
®
Filtration
Friendly symbol on the bottom of your filter basket. If you
do not see this symbol, please call 1-800-672-6333.
To use the water filtration
system in your MR. COFFEE
®
Coffeemaker, please follow
these steps:
1. Align the red indicator
on the frame to the letter
that corresponds with the
month that you are using
the disk for the first time.
This serves to remind you
to change the disk every month (approx. 30 brewing
cycles). (Figure 2) To change the disk, remove the used
disk, insert new disk into the frame.
NOTE: For optimum results, use the water filtration system
with a permanent filter.
2. Rinse the water filter in fresh water before first use.
3. Follow “Adding Water and Ground Coffee” Instructions
in the next section.
4. When you are done brewing your coffee, rinse the water
filter with fresh water. Do not put your water filter in the
dishwasher.
Adding Water and Ground Coffee:
1. Lift and open the filter basket lid. For your convenience,
you can lift out the removable filter basket.
2. Place a MR. COFFEE
®
brand 10-12 cup paper basket-
style filter or a MR. COFFEE
®
permanent filter into the
removable filter basket. (Figure 3)
NOTE: If using paper filters, it is important that the sides
of the filter fit flush against the side of the filter basket. If
filter collapse occurs, dampen the filter before placing in
the filter basket and adding ground coffee and water.
3. Add the desired amount of
coffee and gently shake to level
the coffee. See the “Suggested
Coffee Measurement Chart”.
4. If using the MR. COFFEE
®
Water
Filtration System, after following
instructions in the Water
Filtration System section, place
the MR. COFFEE
®
water filter in
the basket, making sure that
the side marked “this side up”
faces you and that the water
filter is level.
5. Be sure the filter basket is
properly centered and all the way down in the filter
basket.
6. Fill the decanter with cold, fresh water to the desired
capacity (1 cup equals 5 ounces). For easy and accurate
filling, the water markings on the glass decanter and
on the dual water windows show the amount of water
needed to make the corresponding desired number of
cups. Do not fill past the “MAX line” or water will flow
out of the overfill hole in the back of the water reservoir.
The amount of coffee brewed will always be slightly less
than the amount of water poured in the water reservoir.
Frame
Filter Disk
(Figure 2)
Red
Indicator
(Figure 3 – Adding water
and ground coffee)
E9 E10
BVMC-SK_15ESM1 .indd 11-12 1/30/15 11:17 AM
Loading ...
Loading ...
Loading ...