Loading ...
Loading ...
Loading ...
© Pro-Ject Audio Systems · Pro-Ject X2 · Revision 2019.10.08
10
TECHNICAL SPECIFICATIONS
X2
Pro-Ject 9’’ Carbon/Alu sandwich tonearm
Nominal speeds
33/45/78 r.p.m.
Speed variance
33: ±0.25 % 45: ±0.20 %
Wow and flutter
33: ±0.12 % 45: ±0.10 %
Signal to noise
-70dB
Effective tonearm mass
13.5g
Effective tonearm length
9 " (230mm)
Overhang
18mm
Power consumption
5W/ 0.3W standby mode
Outboard power supply
15V/ 0.8 A DC, universal power supply
Dimensions (W x H x D)
460 x 150 x 340mm, dust cover open 460 x 415 x 435mm
Weight
10 kg
Potential incorrect use and fault conditions
Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before
leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but
can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common
fault symptoms is included.
The platter doesn't turn although the unit is switched on:
The unit is not connected to the mains power supply.
No mains at the socket.
Drive belt is not fitted or has slipped off.
No signal through one or other channel or both channels:
No signal contact from the cartridge to the internal tonearm wiring or from that to the arm lead or
from that to the phono box or between that and the amplifier. This could be due to a faulty plug,
broken wire or solder joint or simply loose plug/socket connection.
Phono input not selected at amplifier.
Amplifier is not switched on.
Amplifier or speakers are defective or muted.
No connection to the loudspeakers.
Strong hum on phono input:
No earth connection from cartridge or arm or arm cable to amplifier, or earth loop.
Distorted or inconsistent sound from one or both channels:
Record player is connected to wrong input of amplifier, or MM/MC switch incorrectly set.
Needle or cantilever damaged.
Wrong r.p.m., drive belt overstretched or dirty, platter bearing without oil, dirty or damaged.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Guarantee repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend
keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the
original packaging according to the diagrams on the last page of this user guide. Please remove these parts and
pack them separately: lid, counterweight, anti-skating weight, platter and belt. Fit the cartridge protection cap.
Insert the transport lock for the tonearm prior to carefully packaging the record player.
Loading ...