Loading ...
Loading ...
Loading ...
(468,1)
北米Model "A3200BE-D" EDITED: 2018/ 12/ 11
2. Using a Phillips screwdriver, remove
the upper and lower screws that secure the
rear combination light assembly.
3. Slide the rear combination light as-
sembly rearward and remove it from the
vehicle.
4. Disconnect the electrical connector.
1) Backup light
2) Rear side marker light
3) Rear turn signal light
5. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
6. Pull the bulb out of the bulb socket and
replace it with a new one.
7. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
8. Reconnect the electrical connector.
1) Guide pins
2) Catch
3) Clip
9. Put the rear combination light assem-
bly into place while aligning the guide pins
and a catch with the guide holes and a clip
on the vehicle.
Replacing bulbs
466
Loading ...
Loading ...
Loading ...