Loading ...
Loading ...
Loading ...
Use
13
ENENEN
Clock format settings menu
The clock format can be set after turning the
appliance on for the first time:
1. Open the settings menu and select SE01.
2. Move the lever to select the desired
format (12-hour or 24-hour clock).
3. Move the lever to the central position
and press (OK) to confirm.
The format will blink for 2 seconds and
the setting will then be saved.
How to change the time:
1. Make sure that the desired clock format
(12h or 24h) has been set as described
above.
2. Keep the lever pressed in the central
position for 3 seconds: the display will
start to flash.
3. Change the hour and minute as
indicated in section “3.2 First use”.
Water settings menu (hard/soft water)
The type of water being used can be set by
selecting one of the three available levels:
HARD, MEDIUM and SOFT.
1. Open the settings menu and select SE02:
By default, the screen will show HA02
(medium).
2. Move the lever up (+) or down (-) to set
the desired level: HA01(soft), HA02
(medium) and HA03 (hard).
3. Move the lever to the central position
and press (OK) to confirm.
The selection will blink for 2 seconds and
the setting will then be saved.
Audible signal settings
You can disable the audible signals as
follows:
1. Open the settings menu and select SE03.
2. Move the lever up or down until you see
the word OFF on the display.
3. Move the lever to the central position
and press (OK) to confirm.
The selection will blink for 2 seconds and
the setting will then be saved.
The clock format is selected only
once and is then saved from that
moment on.
Loading ...
Loading ...
Loading ...