User Manual LG 60UP80006LA UP80 60 inch 4K Smart UHD TV

1. Press the 'Setting' button on your LG TV remote control.
2. Select 'All Settings' using the 'OK' button on your remote control.
3. Select the 'Sound' menu.
4. Select 'Sound Out' . This is where you can choose how sound is outputted through your TV.

You can connect USB storage device to you TV: USB HDD, USB Flash Drive.Simply connect your USB device to the USB port on the TV.
- The USB ports tend to be on the side or the back of the TV.
- Some USB storage devices many not be supported. If you use a USB extension cable, it may not be recognised.
- Format: Remember to only use USB storage devices formatted with the FAT32 or NTFS file system provided by Windows Operating System. MAC iOS does not support the recommended file formats.
- Storage size : It's recommended to use a USB HDD (Hard Drive) of 40GB to 2TB.

Please find a power button under the LG logo on the TV. You can only turn on of off the TV with the button, and cannot use it to control other features.
With some models the power button may be located on the rear, bottom right hand side. Some models will allow you to access other features besides power when using the button, please refer to your owners manual for more information.

Check before you start.These can be the reasons your remote control isn't working.
1. Low battery: replace the batteries in the remote control.
2. Obstacles in front of the TV: Remove all the obstacles in front of the TV that cover the receiver. The receiver is located at the bottom right corner or in the middle.
3. Intense light sources: An intense light source can obscure the infrared reader (e.g. brignt sunlight). Try moving the TV to another place.