Loading ...
Loading ...
Loading ...
9
REFRIGERATOR INSTALLATION
WARNING
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.
UNPACKING YOUR REFRIGERATOR
Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warning-
type labels, the model and serial number label, or
the Tech Sheet that is located under the front of the
refrigerator.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your ongers. Wipe with
warm water and dry.
Do not use sharp instruments, rubbing alcohol, pammable
puids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.
WARNING
Excessive Weight Hazard:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the poor. Always pull the refrigerator straight out
when moving it. Do not wiggle or walk the refrigerator
when trying to move it, as poor damage could occur.
WARNING
Explosion Hazard:
Keep pammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
can result in ore, explosion, or death.
DIMENSIONS AND CLEARANCES
v Check the dimensions of the appliance and the
installation path to ensure there is suècient room
to move the refrigerator through doors or narrow
openings.
v If an opening is too narrow to ot the refrigerator
through, remove the refrigerator doors. See Removing
and Replacing Refrigerator Doors in this manual.
v The installation location chosen for the refrigerator
should allow space behind the unit for connections
and airpow and space in front to open the doors and
drawers.
v Too small of a distance from adjacent items may result
in lowered freezing capability and increased electricity
consumption charges. Allow at least 27 inches (686
mm) in front of the refrigerator to open the doors, and
at least 2 inches (51 mm) between the back of the
refrigerator and the wall.
B
A
C
D
F
G
E
H
I
Model 7135# 7035#
A
Depth without handle
32 3/8"
(822 mm)
28 3/4"
(728 mm)
B Width
35 3/4"
(908 mm)
35 3/4"
(908 mm)
C Height to Top of Case
68 3/8"
(1737 mm)
68 3/8"
(1737 mm)
D Height to Top of Hinge
69 3/4"
(1772 mm)
69 3/4"
(1772 mm)
E Back Clearance
2"
(50 mm)
2"
(50 mm)
F Depth without Door
28 1/2"
(724 mm)
24 3/4"
(630 mm)
G
Depth
Total with Door Open
0£
47 1/8"
(1197 mm)
43 1/2"
(1103 mm)
H
Depth
Total with Freezer Door
Open
56 19/64"
(1430 mm)
48 27/64"
(1230 mm)
I Depth with handle
34 7/8"
(886 mm)
31 1/4"
(792 mm)
Loading ...
Loading ...
Loading ...