Loading ...
Loading ...
Loading ...
(211,1)
北米Model "A1330BE-B" EDITED: 2017/ 11/ 30
& Setting the clock automati-
cally
S03AF02
1. Press the button.
2. Select “Settings”.
3. Select “Vehicle”.
4. Select “Clock adjustment” and then
select “Auto”.
5. Press the
button again to complete
the setting.
! Models with navigation system
S03AF0201
The clock will be set automatically where a
GPS signal is available.
! Models without navigation system
S03AF0202
The clock will be set and adjusted auto-
matically when a smartphone is connected
via Bluetooth
®
for transferring phonebook
data.
1. Register the smartphone to the audio
system. For details, refer to “Bluetooth
SETTINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
2. Transfer phonebook data to the sys-
tem. For details, refer to “Bluetooth SET-
TINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of smart-
phone, the settings of the connected
smartphone may need to be changed.
(ex: For iOS or other models, notifica-
tion settings may need to be activated.)
For details, check the instructions on
connecting smartphones.
& Regulatory information
S03AF04
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.
Light control switch
S03AH
& Precautions and tips
S03AH06
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the lights are turned off.
If the vehicle is left unattended
for a long time with the lights
illuminated, the battery may be
discharged.
Models with “keyless access with
push-button start system”:
The light control switch operates when the
push-button ignition switch is in the “ACC”
or “ON” position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without “keyless access with
push-button start system”:
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
– CONTINUED –
Instruments and controls/Light control switch
3-67
3
Loading ...
Loading ...
Loading ...