Loading ...
Loading ...
Loading ...
FORESTER (NA) A8050BE–A (ENG.)
10-4
D Do not use soap containing grit to clean the wheels. Be sure to use a
neutral cleaning agent, and later rinse thoroughly with water. Do not
clean the wheels with a stiff brush or expose them to a high-speed wash-
ing device.
D Clean the vehicle (including the aluminum wheels) with water as soon
as possible when it has been splashed with sea water, exposed to sea
breezes, or driven on roads treated with salt or other agents.
J Cleaning fog light lens
If the fog light protector ought to be removed for cleaning the fog light
lens, follow then the instruction given in “Fog light” section (Replacing
bulbs) under Chapter 11.
When cleaning the fog light lens, park the vehicle on a safe place, stop
the engine and confirm that the fog light lens is not hot before proceed-
ing with the work.
Corrosion protection
Your SUBARU has been designed and built to resist corrosion. Special
materials and protective finishes have been used on most parts of the
vehicle to help maintain fine appearance, strength, and reliable opera-
tion.
B Most common causes of corrosion
The most common causes of corrosion are:
1. The accumulation of moisture retaining dirt and debris in body
panel sections, cavities, and other areas.
2. Damage to paint and other protective coatings caused by gravel
and stone chips or minor accidents.
Corrosion is accelerated on the vehicle when:
1. It is exposed to road salt or dust control chemicals, or used in
coastal areas where there is more salt in the air, or in areas where
there is considerable industrial pollution.
2. It is driven in areas of high humidity, especially when temperatures
range just above freezing.
Loading ...
Loading ...
Loading ...