Loading ...
©2013 DJI Innovations. All Rights Reserved
5. Make sure NM Assistant and autopilot system connect successfully.
6. Set flying parameters in NM Assistant.
Step3: Flying test
Prepare the aircraft and make sure all connections are ok. Start Motors to takeoff the
aircraft.
View flying parameters.
Set gain value.
Set gimbal parameters.
Only gain value and gimbal parameter are available to configure during
flying; other parameters can be set only after landing.
FAQ
Problems
Reasons
Solutions
Status Indicator of
BTU is not solid
Green on.
Firmware of MC is out of date.
Please update firmware.
BTU and autopilot system
connection failure.
Please check the connection.
BTU damage.
Please contact your dealer.
Loading ...