Loading ...
Loading ...
Loading ...
BISSELL.com
10
Cleaning Your Machine After Use
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
NOTICE: To reduce the risk of a leaking condition, do not store machine where
freezing may occur. Damage to internal components may result.
3
4
1
2
5
6
Unplug the machine. Remove and rinse the Dirty Water Tank thoroughly.
Remove tank vent & foam
filter (located on top of the
Dirty Water Tank) and rinse.
To remove and clean the
nozzle, keep the Dirty Water
Tank off of the machine.
Gently pull the two tabs that
point up near the front of
the machine. The nozzle will
unhook to remove. Rinse under
running water. When finished,
slightly tilt the machine so
the foot raises up so you can
align the nozzle hooks at
the floor of the machine.
Rotate the nozzle up to clip
back into place.
Remove lint and hair from
red gasket in base of machine.
(Do not remove gasket.)
Once the parts have been
rinsed clean and dried,
replace the Dirty Water Tank
to the base of the machine
and secure with both latches.
Wrap power cable around
Quick Release Cable Wrap
on side of the machine. Wipe
all surfaces with a soft cloth
and store machine upright in
a protected, dry area.
Loading ...
Loading ...
Loading ...