Loading ...
Loading ...
Loading ...
Frequently Asked Questions
83
Problem Possible cause and solution
At the end of the pro-
gram, the alarm tone
sounds and the display
shows the following
message:
Fault F601
There is a fault in the AutoDos.
Turn the dishwasher off and back on again.
Check whether the PowerDisk holder and the
PowerDisk have been installed correctly (see “Au-
tomatic dispensing/AutoDos” under “Detergent”).
Activate the AutoDos function and start the pro-
gram again.
If the fault message appears again, there is a techni-
cal fault. You can continue to use your dishwasher by
deactivating AutoDos using the AutoDos sensor
button and manually dispensing the detergent via the
detergent compartment.
If you wish to use AutoDos again, contact Miele
Customer Service.
At the end of the pro-
gram, the alarm tone
sounds and the display
shows the following
message:
AutoDos maintenance re-
quired
The dishwasher does
not turn off at the end
of the program.
The dishware may not
be clean because an in-
sufficient amount of de-
tergent was dispensed.
The AutoDos func-
tion is automatically de-
activated during the
program sequence.
An empty PowerDisk has been inserted or the Auto-
Dos is blocked by residual detergent. Detergent
dosage is insufficient.
The AutoDos function was automatically deacti-
vated.
Turn the dishwasher off and back on again.
Multiple messages appear in the display.
Clean the fill channel of the AutoDos (see “Clean-
ing the AutoDos” under “Detergent”).
Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).
Select OK to confirm each message.
Activate the AutoDos function by confirming the
message AutoDos available with OK.
Start the program again.
The program duration will be extended by up to
2.5hours to flush out the AutoDos detergent outlet.
Loading ...
Loading ...
Loading ...